18250829381
Maintenance and safety of rock cutting machine
Publish：2018-04-09 View：291
(1) Bearings. The bearings of mining machinery bear all the load of the machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, it is required that the injected lubricating oil must be clean and the seal must be good.
(2) Newly installed wheels are prone to looseness and must be checked regularly.
(3) Pay attention to checking if all parts of the machine are working properly.
(4) Pay attention to checking the degree of wear of easily worn parts and replace worn parts at any time.
(5) The base plane of the movable device should be cleaned of dust and other substances to prevent the movable bearings from moving on the base frame when the machine encounters materials that cannot be broken, resulting in serious accidents.
(6) If the bearing oil temperature rises, the vehicle should be stopped immediately to check the cause and eliminate it.
(7) If there is any impact sound during the operation of the transmission gear, it should be stopped immediately for inspection and eliminated.
(2) Newly installed wheels are prone to looseness and must be checked regularly.
(3) Pay attention to checking if all parts of the machine are working properly.
(4) Pay attention to checking the degree of wear of easily worn parts and replace worn parts at any time.
(5) The base plane of the movable device should be cleaned of dust and other substances to prevent the movable bearings from moving on the base frame when the machine encounters materials that cannot be broken, resulting in serious accidents.
(6) If the bearing oil temperature rises, the vehicle should be stopped immediately to check the cause and eliminate it.
(7) If there is any impact sound during the operation of the transmission gear, it should be stopped immediately for inspection and eliminated.
Recommend
More+
News
More+
Analysis of Diamond Wire Cutting Technology
2018-04-09
Copyright 2023 © Xiamen Pinhe Precision Technology Co., Ltd
閩ICP備2024063740號(hào)-1
18250829381